'graphok',
70=>'graphwarn',
90=>'grapherror',
);
}
$chars_per_pixel = 7;
if (strlen($text) * $chars_per_pixel > $total_width - 35) {
$text_trimmed = substr($text,0, floor(($total_width - 35) / $chars_per_pixel)).'..';
} else {
$text_trimmed = $text;
}
$clean_val = preg_replace("/[^0-9\.]*/","",$val);
if ($total == 0) {
$percent = ($clean_val == 0) ? 0 : 100;
} else {
$percent = round($clean_val/$total*100);
}
$graph_class = false;
foreach ($classes as $limit=>$class) {
if (!$graph_class) {
$graph_class = $class;
}
if ($limit <= $percent) {
$graph_class = $class;
} else {
break;
}
}
$width = $total_width * ($percent/100);
if ($width > $total_width) {
$width = $total_width;
}
$tooltip = $text.": ".$val.$real_units." / ".$total.$real_units." (".$percent."%)";
$display_value = ($show_percent ? $percent."%" : $val.$real_units);
$out = "\n";
$out .= "
\n";
$out .= "
".$text_trimmed."
\n";
$out .= "
".$display_value."
\n";
$out .= "
\n";
$out .= "
".$text."
\n";
$out .= "
".$status_text."
\n";
$out .= "
\n";
$out .= "
".$text."
\n";
$out .= "
\n";
$out .= "
"._("System Statistics")."
";
$out .= ""._("Processor")."
";
$loadavg = $sysinfo->loadavg(true);
$out .= draw_box(_("Load Average"), $loadavg['avg'][0]);
$out .= draw_graph(_("CPU"), "", number_format($loadavg['cpupercent'],2), 100);
$out .= ""._("Memory")."
";
$memory = $sysinfo->memory();
$app_memory = isset($memory["ram"]["app"]) ? $memory["ram"]["app"] : $memory["ram"]["total"] - $memory["ram"]["t_free"];
$out .= draw_graph(_("App Memory"), "MB", number_format($app_memory/1024,2), $memory["ram"]["total"]/1024);
$out .= draw_graph(_("Swap"), "MB", number_format(($memory["swap"]["total"]-$memory["swap"]["free"])/1024,2), $memory["swap"]["total"]/1024);
$out .= ""._("Disks")."
";
foreach ($sysinfo->filesystems() as $fs) {
$out .= draw_graph($fs["mount"], "GB", number_format($fs["used"]/1024/1024, 2), number_format($fs["size"]/1024/1024,2), strpos( $fs["options"],"ro" )!==false ? array(0=>"graphok"):null);
}
$out .= ""._("Networks")."
";
foreach ($sysinfo->network() as $net_name=>$net) {
$net_name = trim($net_name);
if ($net_name == 'lo' || $net_name == 'sit0' || preg_match('/w.g./',$net_name)) continue;
$tx = new average_rate_calculator($_SESSION["netstats"][$net_name]["tx"], 10); // 30s max age
$rx = new average_rate_calculator($_SESSION["netstats"][$net_name]["rx"], 10); // 30s max age
$rx->add( $net["rx_bytes"] );
$tx->add( $net["tx_bytes"] );
$out .= draw_box($net_name." "._("receive"), number_format($rx->average()/1000,2)." KB/s");
$out .= draw_box($net_name." "._("transmit"), number_format($tx->average()/1000,2)." KB/s");
}
return $out;
}
function show_aststats() {
global $amp_conf;
global $astinfo;
$out = '';
$channels = $astinfo->get_channel_totals();
// figure out max_calls
// guess at the max calls: number of users
if (!isset($_SESSION["calculated_max_calls"])) {
// set max calls to either MAXCALLS in amportal.conf, or the number of users in the system
if (isset($amp_conf['MAXCALLS'])) {
$_SESSION["calculated_max_calls"] = $amp_conf["MAXCALLS"];
} else if (function_exists('core_users_list')) {
$_SESSION["calculated_max_calls"] = count(core_users_list());
} else {
$_SESSION["calculated_max_calls"] = 1;
}
}
// we currently see more calls than we guessed, increase it
if ($channels['total_calls'] > $_SESSION["calculated_max_calls"]) {
$_SESSION["calculated_max_calls"] = $channels['total_calls'];
}
$max_calls = $_SESSION["calculated_max_calls"];
$classes = array(0=>'graphok');
$max_chans = $max_calls * 2;
$out .= ""._("FreePBX Statistics")."
";
$out .= draw_graph(_('Total active calls'), '', $channels['total_calls'], $max_calls, $classes , false, BAR_WIDTH_LEFT);
$out .= draw_graph(_('Internal calls'), '', $channels['internal_calls'], $max_calls, $classes , false, BAR_WIDTH_LEFT);
$out .= draw_graph(_('External calls'), '', $channels['external_calls'], $max_calls, $classes , false, BAR_WIDTH_LEFT);
$out .= draw_graph(_('Total active channels'), '', $channels['total_channels'], $max_chans, $classes , false, BAR_WIDTH_LEFT);
$out .= ""._("FreePBX Connections")."
";
if (function_exists('core_trunks_list')) {
$trunks = core_trunks_list(true);
} else {
$trunks = false;
}
$conns = $astinfo->get_connections( $trunks );
if ($conns['users_total'] > 0) {
$out .= draw_graph(_('IP Phones Online'), '', $conns['users_online'], $conns['users_total'], $classes, false, BAR_WIDTH_LEFT);
}
if ($conns['trunks_total'] > 0) {
$out .= draw_graph(_('IP Trunks Online'), '', $conns['trunks_online'], $conns['trunks_total'], $classes, false, BAR_WIDTH_LEFT);
}
if ($conns['registrations_total'] > 0) {
$out .= draw_graph(_('IP Trunk Registrations'), '', $conns['registrations_online'], $conns['registrations_total'], $classes, false, BAR_WIDTH_LEFT);
}
return $out;
}
function show_sysinfo() {
global $sysinfo;
global $astinfo;
$out = ""._("Uptime")."
";
$out .= '';
/*
$out .= '| Distro: | '.$sysinfo->distro().' |
|---|
';
$out .= '| Kernel: | '.$sysinfo->kernel().' |
|---|
';
$cpu = $sysinfo->cpu_info();
$out .= '| CPU: | '.$cpu['model'].' '.$cpu['cpuspeed'].' |
|---|
';
*/
$out .= '| '._('System Uptime').': | '.time_string($sysinfo->uptime()).' |
|---|
';
$ast_uptime = $astinfo->get_uptime();
if (empty($ast_uptime['system'])) {
$ast_uptime['system'] = time_string(0);
}
if (empty($ast_uptime['reload'])) {
$ast_uptime['reload'] = time_string(0);
}
$out .= '| '._('Asterisk Uptime').': | '.$ast_uptime['system'].' |
|---|
';
$out .= '| '._('Last Reload').': | '.$ast_uptime['reload'].' |
|---|
';
$out .= '
';
return $out;
}
function show_procinfo() {
global $procinfo;
global $astinfo;
global $amp_conf;
$out = '';
$out .= ""._("Server Status")."
";
// asterisk
if ($astver = $astinfo->check_asterisk()) {
$out .= draw_status_box(_("Asterisk"), "ok", _('Asterisk is running: '.$astver));
} else {
$out .= draw_status_box(_("Asterisk"), "error", _('Asterisk is not running, this is a critical service!'));
}
// asterisk proxy (optionally)
if (isset($amp_conf['ASTMANAGERPROXYPORT'])) {
if ($procinfo->check_port($amp_conf['ASTMANAGERPROXYPORT'])) {
$out .= draw_status_box(_("Manager Proxy"), "ok", _('Asterisk Manager Proxy is running'));
} else {
$out .= draw_status_box(_("Manager Proxy"), "warn", _('Asterisk Manager Proxy is not running, FreePBX will fall back to using Asterisk directly, which may result in poor performance'));
}
}
// fop
if ($procinfo->check_fop_server()) {
$out .= draw_status_box(_("Op Panel"), "ok", _('FOP Operator Panel Server is running'));
} else {
if (isset($amp_conf['FOPRUN']) && $amp_conf['FOPRUN']) {
// it should be running
$out .= draw_status_box(_("Op Panel"), "warn", _('FOP Operator Panel Server is not running, you will not be able to use the operator panel, but the system will run fine without it.'));
} else {
$out .= draw_status_box(_("Op Panel"), "disabled", _('FOP Operator Panel is disabled in amportal.conf'));
}
}
// mysql
if ($amp_conf['AMPDBENGINE'] == "mysql") {
/* this is silly- it's always running, if the web interface loads
if ($procinfo->check_mysql($amp_conf['AMPDBHOST'])) {
$out .= draw_status_box(_("MySQL"), "ok", _('MySQL Server is running'));
} else {
$out .= draw_status_box(_("MySQL"), "error", _('MySQL Server is not running, this is a critical service for the web interface and call logs!'));
}
*/
$out .= draw_status_box(_("MySQL"), "ok", _('MySQL Server is running'));
}
// web always runs .. HOWEVER, we can turn it off with dhtml
$out .= draw_status_box(_("Web Server"), "ok", _('Web Server is running'));
// ssh
$ssh_port = (isset($amp_conf['SSHPORT']) && ctype_digit($amp_conf['SSHPORT']) && ($amp_conf['SSHPORT'] > 0) && ($amp_conf['SSHPORT'] < 65536))?$amp_conf['SSHPORT']:22;
if ($procinfo->check_port($ssh_port)) {
$out .= draw_status_box(_("SSH Server"), "ok", _('SSH Server is running'));
} else {
$out .= draw_status_box(_("SSH Server"), "warn", _('SSH Server is not running, you will not be able to connect to the system console remotely'));
}
return $out;
}
function show_syslog(&$md5_checksum) {
global $db;
$out = '';
$checksum = '';
// notify_classes are also used as the image names
$notify_classes = array(
NOTIFICATION_TYPE_CRITICAL => 'notify_critical',
NOTIFICATION_TYPE_SECURITY => 'notify_security',
NOTIFICATION_TYPE_UPDATE => 'notify_update',
NOTIFICATION_TYPE_ERROR => 'notify_error',
NOTIFICATION_TYPE_WARNING => 'notify_warning',
NOTIFICATION_TYPE_NOTICE => 'notify_notice',
);
$notify_descriptions = array(
NOTIFICATION_TYPE_CRITICAL => _('Critical Error'),
NOTIFICATION_TYPE_SECURITY => _('Security Update'),
NOTIFICATION_TYPE_UPDATE => _('Update'),
NOTIFICATION_TYPE_ERROR => _('Error'),
NOTIFICATION_TYPE_WARNING => _('Warning'),
NOTIFICATION_TYPE_NOTICE => _('Notice'),
);
$notify =& notifications::create($db);
$showall = (isset($_SESSION['syslog_showall']) ? $_SESSION['syslog_showall'] : false);
$items = $notify->list_all($showall);
$out .= ""._("FreePBX Notices")."
";
if (count($items)) {
$out .= '';
foreach ($items as $item) {
$checksum .= $item['module'].$item['id']; // checksum, so it is only updated on the page if this has changed
$domid = "notify_item_".str_replace(' ','_',$item['module']).'_'.str_replace(' ','_',$item['id']);
$out .= ' ';
$out .= $item['display_text'].'';
$out .= '';
$out .= '';
$out .= '';
$out .= nl2br($item['extended_text']);
$out .= '
'.sprintf('Added %s ago', time_string(time() - $item['timestamp'])).'
'.
'('.$item['module'].'.'.$item['id'].')';
$out .= '
';
$out .= '';
}
$out .= '
';
} else {
if ($showall) {
$out .= _('No notifications');
} else {
$out .= _('No new notifications');
}
}
$md5_checksum = md5($checksum);
$out .= '';
return $out;
}
function do_syslog_ack() {
global $db;
$notify =& notifications::create($db);
if (isset($_REQUEST['module']) && $_REQUEST['id']) {
$notify->reset($_REQUEST['module'], $_REQUEST['id']);
}
}
function do_syslog_delete() {
global $db;
$notify =& notifications::create($db);
if (isset($_REQUEST['module']) && $_REQUEST['id']) {
var_dump($_REQUEST);
$notify->safe_delete($_REQUEST['module'], $_REQUEST['id']);
}
}
/********************************************************************************************/
define("IN_PHPSYSINFO", "1");
define("APP_ROOT", dirname(__FILE__).'/phpsysinfo');
include APP_ROOT."/common_functions.php";
include APP_ROOT."/class.".PHP_OS.".inc.php";
include_once "common/json.inc.php";
include dirname(__FILE__)."/class.astinfo.php";
include dirname(__FILE__)."/class.average_rate_calculator.php";
include dirname(__FILE__)."/class.procinfo.php";
include dirname(__FILE__)."/class.error.inc.php";
$error = new Error;
$sysinfo = new sysinfo;
$astinfo = new astinfo($astman);
$procinfo = new procinfo;
if (!$quietmode) {
?>
FreePBX System Status
';
// regular page
echo '
';
echo show_syslog($syslog_md5);
// syslog_md5 is used by javascript updateInfo() to determine if the syslog div contents have changed
echo '';
//echo "log goes here
";
echo '
';
echo '
';
echo show_aststats();
echo '
';
echo '
';
echo show_sysinfo();
echo '
';
echo '
';
echo '
';
echo show_sysstats();
echo '
';
echo '
';
echo show_procinfo();
echo '
';
echo '
';
echo '
';
if($dashboard_debug && $error->ErrorsExist()) {
$fh = fopen($amp_conf['ASTLOGDIR']."/dashboard-error.log","a");
fwrite($fh, $error->ErrorsAsText());
fclose($fh);
}
} else {
// Handle AJAX updates
switch ($info) {
case "sysstats":
echo show_sysstats();
break;
case "aststats":
echo show_aststats();
break;
case "procinfo":
echo show_procinfo();
break;
case 'sysinfo':
echo show_sysinfo();
break;
case 'syslog':
echo show_syslog($syslog_md5);
// syslog_md5 is used by javascript updateInfo() to determine if the syslog div contents have changed
echo '';
break;
case 'syslog_ack':
do_syslog_ack();
break;
case 'syslog_delete':
do_syslog_delete();
break;
case 'info':
$json = new Services_JSON();
header("Content-type: application/json");
echo $json->encode(
array(
'procinfo'=>show_procinfo(),
'sysinfo'=>show_sysinfo(),
'syslog'=>show_syslog($syslog_md5),
'syslog_md5'=>$syslog_md5,
)
);
break;
case 'stats':
$json = new Services_JSON();
header("Content-type: application/json");
echo $json->encode(
array(
'sysstats'=>show_sysstats(),
'aststats'=>show_aststats(),
)
);
break;
case 'all':
$json = new Services_JSON();
header("Content-type: application/json");
echo $json->encode(
array(
'sysstats'=>show_sysstats(),
'aststats'=>show_aststats(),
'procinfo'=>show_procinfo(),
'sysinfo'=>show_sysinfo(),
'syslog'=>show_syslog(),
)
);
break;
}
}
?>
';
}
if (!$item['reset']) {
$out .= ''.
'.'/images/notify_delete.png)
';
}
$out .= '